Quiet Power Supplies - Zalman ZM660-XT 660 Watt Quiet Power Supply

Zalman ZM660-XT

660W PSU equipped with a heat-pipe design for stable and silent operation.

Solid Capacitors for Reinforced Stability Solid Capacitors, which have a longer lifespan and lower ESR*, compared with electrolytic capacitors, are incorporated for maximum reduction of output ripple noise and ultra stable operation. * ESR (Equivalent Series Resistance).

Heat-pipe Installed for Maximum Cooling Performance and Ultra Quiet Operation An ultra high performance heat-pipe incorporated on the power supply’s main rectifiers enables high load operation even at low RPM for a dramatic reduction in noise levels.

80 PLUS® BRONZE Certified High Efficiency Design

This power supply is 80 PLUS® Bronze certified with 82% minimum / 88% maximum efficiency(230VAC, Typical Load) incorporating a high switching frequency & low power-loss circuitry design, and guarantees higher efficiency compared to uncertified products.

80 PLUS® is an energy efficiency certification program administered by Ecos Consulting of the U.S.A.
 
 

Flexible Modular Cables Slim and flexible modular cables facilitate simplified cable management and optimal airflow through the computer enclosure for increased cooling performance.

Four Independent +12VDC Rails Four +12VDC rails supply power independently to the CPU, VGA, motherboard, and peripherals for stable operation of core components.

Ultra Quiet 140mm Fan An ultra quiet 2 Ball-Bearing cooling fan increases airflow while minimizing noise for a superb ultra quiet computing environment.

Wafer Bridge for Reinforced Cooling Performance Unlike conventional modular PSUs that utilize bulky wires to connect the main and modular circuit boards, a compact wafer is utilized, enhancing internal airflow and cooling performance.

Supports ATX12V CPU 4-Pin and EPS12V CPU 8-Pin Two ATX12V CPU 2?2(4-Pin) power cables can be combined to form an EPS12V CPU 8-Pin power cable.

EZ-Grip Connectors for ODD/HDD EZ-Grip Connectors are incorporated for easy attachment and removal of plugs.

Gold-Plated Terminals All connector terminals are gold-plated to minimize power loss.

Multiple Safety Features for the Highest Level of Safety Over-Voltage Protection, Over-Current Protection, Short-Circuit Protection, Under-Voltage Protection, and Over-Temperature Protection features protect the system from potential electrical hazards.

High Intensity Blue LED

Blue LEDs are installed inside the power supply for cool aesthetics.

Active PFC for Improved Power Factor & Reduced Harmonics

By implementing Active PFC(Power Factor Correction), instead of Passive PFC with a Power Factor(PF) of 75%, the PF is improved up to 99% while harmful harmonic frequencies are reduced to meet the Line Harmonic Distortion Requirement of EC61000-3-2 Class D.

WEEE & RoHS

Complies with WEEE & RoHS environmental directives of the European Union.

• WEEE (Waste Electrical and Electronic Equipment)
• RoHS (Restriction of Hazardous Substances)

International Safety and EMC Certifications

Zalman ZM660-XT Output Power Cable Specifications

Zalman ZM660-XT Dual-Connector (ZM-DC1) Components

Zalman ZM660-XT Electrical & Physical Characteristics

Components

1 x Power Supply 1 x PCI-E2(6+2pin) Cable 2 x ODD/HDD Cables 4 x S-ATA Cables 1 x FDD Cable 1 x Fan Dual-Connector (ZM-DC1) 7 x User's Manual 5 x Cable Ties 4 x PSU Installation Screws 1 x AC Power Cord (not included in certain countries)

Cautionary Notes:

1. Plugging the main power connector P1 into the motherboard while the product is connected to the AC power source may result in damage to the motherboard.
2. Make sure that the connectors are connected to their designated locations, and that the connectors are not oriented in the wrong direction when connecting the DC output connectors.
3. If the Power On light fails to light up when the main power button is pressed after completing the installation procedure, then some devices may be plugged in incorrectly or the motherboard may be faulty.