You are here

Price: $14.95
In Stock: No
SKU: pc_mounting_kit

Nexus Anti-Vibration PC Mounting Kit

Nexus PC Mounting Kit

The Nexus Anti-Vibration Mounting Kit is the ideal solution for you if you want to get rid of every last source of PC noise! Nexus' mounting kit comes with a variety of rubber mounting solutions for your case fans and the CPU fan, soft rubber feet for your case, and tie wraps to keep the cables nice and tidy.

Nexus Anti-Vibration PC Mounting Kit Specifications

  • 12 units rubber fan mounts for open chassis fans
  • 12 units rubber fan mounts for closed chassis fans
  • 12 units rubber grommets with screws for hard disk drive mounting
  • 4 units rubber feet with adhesive
  • 20 units tie raps
  • Packaged in a useful clear plastic case

Mounting Kit Retail Package


Nexus PC Mounting Kit Package
 

Anti-Vibration PC Mounting Kit

The Nexus Anti-Vibration PC Mounting Kit contains ideal solutions for mounting your CPU cooler fan and system fans using rubber, tying together any loose cables plus fitting your case on soft rubber feet. Five different items to reduce vibration and prevent resonance.

This convenient PC mounting kit comes in a useful case to keep little screws and components in. You will not lose them anymore!


Nexus PC Mounting Kit - Parts

12 rubber fan mounts for open chassis fans

  • Prevents resonance, absorbs vibrations that otherwise would be transmitted from the fan into the computer case.
  • To be used on open chassis fans
  • 4 units to be used per fan, so sufficient rubber fan mounts for 3 fans

PC Mounting Kit - Mounts DiagramPC Mounting Kit - Mounts>


<h2>12 rubber fan mounts for closed chassis fans</h2>


<table
  cellpadding=
  • Prevents resonance, absorbs vibrations that otherwise would be transmitted from the fan into the computer case
  • To be used on closed chassis fans
  • 4 units to be used per fan, so sufficient rubber fan mounts for 3 fans
Rubber Mounts For Closed Chassis Fans
Rubber Mounts For Closed Chassis Fans - Diagram
Closed Chassis Fans

12 rubber grommets with screws for hard disk drive

  • Helps to reduce transmitted vibration noise from the hard disk drive, by isolating the mounted hard disk drive from the case chassis
  • Suitable for both 3.5"and 2.5" hard drives
  • 6 units to be used per 3.5" hard disk drive or 4 to be used per 2.5" hard disk drive, so sufficient grommets and screws for two 3.5" or three 2.5" hard disk drives
  • Can be used on several other componets too!

4 units rubber feet with adhesive

  • Superb soft rubber feet to replace any hard plastic version
  • Prevents the transition of unwanted vibrations from inside a PC via the chassis into the desk or hard floor
  • With pre-applied adhesive tape
  • Can also be used on printers, speakers etc.

20 units tie wraps

  • Clear plastic tie wraps
  • To tie up loose cables to prevent them from hitting fan blades and to prevent annoying noise caused by loose cables toughing the case chassis
  • 9 cm / 3.54 inch length


 

Price: $14.95