Arctic Silver Adhesive, 7 Grams
Home > Arctic Silver > Arctic Silver Premium Thermal Adhesive, 7 grams
Arctic Silver Premium Thermal Adhesive is made with 99.8% pure micronized silver. 62% to 65% silver content by weight. Superior thermal performance.
- 40°C to >150°C (Bond strength is slightly weakened at temperatures below 0°C due to crystallization.)
Arctic Silver Thermal Adhesive was formulated to conduct heat, not electricity.
NOTE: Even though Arctic Silver Thermal Adhesive is specifically engineered for high electrical resistance, it should be kept away from electrical traces, pins, and leads. The cured adhesive is slightly capacitive and could potentially cause problems if it bridged two close-proximity electrical paths.
AS Premium Thermal Adhesive is RoHS Compliant.
Arctic Silver Thermal Adhesive should be kept cold and away from UV light (sunlight and florescent lighting). Arctic Silver recommends refrigerating the unused material and allowing it to come to room temperature prior to use.
A set of Arctic Silver Adhesive consists of two tubes containing a total of 7 grams of adhesive (3.5 grams of Part A and 3.5 grams of Part B) and a plastic reusable mixing wand.
CAUTION! Arctic Silver Premium Thermal Adhesive is a permanent adhesive. Components you attach with Arctic Silver Adhesive will stay attached forever.