No longer available.
	Price: $54.95

Home > Video Heatsinks > Zalman VF3000A Video Cooler for HD5830 HD5850 HD5870

Zalman VF3000A

Zalman's VF3000a is the latest in a series of silent video card coolers. The VF3000a is designed for ATI Radeon HD5830, HD5850, and HD5870 video cards. The VF3000A uses a two-way heatpipe heat transfer system paired with a giant heatsink, high-efficiency silent 92mm fans, as well as peripheral component cooling to produce an ultra quiet, yet highly effective video cooling system. Zalman's VF3000A also includes a cool aesthetic design, including blue-led quiet fan lighting.
 

Powerful Cooling Performance Utilizing Zalman's latest IHD(Interactive Heat Transfer Design) technology in which the high performance heatpipe's 2-way heat transfer and maximum dissipation area provide powerful cooling performance.		Ultra Quiet Design The VF3000A heatsink is optimized for high performance during quiet operation, incorporating a switching noise eliminated high capacity dual 92mm fan for intensified cooling performance and minimized noise. 'Switching Noise' is the high frequency harmonic noise that can result from voltage regulation.
Excellent Peripheral Component Cooling The dual 92mm fans cool not only the heatsink and VGA RAM, but all other peripheral components surrounding the VGA chipset.		Ultra Quiet 92mm Blue LED Dual Fans Ultra quiet 92mm fans are incorporated into the VF3000A for minimized noise. Blue LEDs heighten the cool aesthetics.
Zalman High Performance Super Thermal Grease ZM-STG2M Zalman's high performance super thermal grease ZM-STG2M maximizes heat transfer from the GPU to the base of the VF3000A for intensified video cooling performance.		Adjustable Fan Speed Controller The Zalman FAN MATE 2, an adjustable fan speed controller, is included with the VF3000A for performance and noise level setting according to user preference.
Environmentally Friendly Design Only environmentally friendly materials are used for compliance with the RoHS (Restriction of Hazardous Substances) standard.

Zalman VF3000A Components

• VF3000A
• VGA RAM Heatsink
• Thermal Grease (ZM-STG2M)
• Rubber Rings
• PVC Washers
• Fixing Nuts
• Springs
• Nipples
• FET Heatsink
• Rubber Washers
• Fixing Pins
• FAN MATE 2
• FAN MATE 2 cable
• Double-sided Tape
• User's Manual

Zalman VF3000A Cautionary Notes

1. The VF3000A is specifically optimized and designed for reference VGA cards ATI Radeon HD5830, HD5850 and HD5870.
2. By installing this product on a VGA (Video Graphics Array) card, two PCI slots immediately below the PCIe (or AGP) slot occupied by the VF3000A will become unusable.
3. If this product is to be installed on a recently released VGA card, please check for compatibility at Zalman's website first.
4. If the VGA card and/or its components interfere with the installation of this product, then stop the installation, refer to the list of compatible VGA cards or motherboards at Zalman's website, and install this product with one of the compatible VGA cards or motherboards.
5. Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or any irritation persists, seek medical attention.
6. To prevent possible injuries, gloves must be worn while handling this product.
7. Excessive force exerted on the fan may cause damage to the fan and/or system.
8. Please keep out of reach of children.
9. Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
10. During transportation of the system, the cooler must be removed. Zalman is not responsible for any damages that occur during the transport of a system.
11. Product design and specifications may be revised to improve quality and performance.
12. Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.