In Stock
	Price: $109.95

Quiet Power Supplies - Nexus NX-5000 500 Watt Silent Power Supply

NX-5000 Silent Power Supply

Finally... for the power hungry...the Nexus NX-5000, 500 Watt Silent Power Supply. This high wattage 500 Watt power supply is loaded with the latest features to fulfill any of the latest PC systems needs. The NX-5000 silent power supply is an EPS12V and ATX 2.01 form factor PSU with a slick black and white look.

What can you expect from the Nexus NX-5000?

• SLI Ready! (dual PCI-Express)
• 6 x Molex 4-pin easy connectors
• 3 x SATA connectors
• 2 x Floppy conectors

Black and White in every little detail

The NX-5000 Silent PSU is completely black and white. To give you a better idea, let us summarize these details: black outer chassis with only black screws, black fan guard, black mesh sleeves on all cables, black Molex 4-pin easy connectors, black and white combination fan and the NX-5000 even has black internal heatsinks!
 

Nexus NX-5000 500 Watt Silent PSU Features:

• Real silent power supply, smooth operation with superb cooling
• Real silent large 12 cm black and white fan
• EPS12V and ATX2.01 formfactor
• Excellent air flow
• Longer power cables
• SLI-Ready (2xPCI-E)
• 6 x Molex 4-pin Easy connector
• 3 x SATA connectors
• 2 x Floppy connector
• Output over voltage protection
• Short circuit protection on all output
• Reset Table power shut down
• Approved by: TÜV, CSA, UL, NEMKO, FCC, C-tick, BSMI, CE
• 100% burn-in under high ambient temperature (50oC)
• Vacuum-impregnated transformer
• MTBF: 100K hours at 25oC
• 100% Hi-pot tested
• Line input fuse protection
• Honey comb grill structure

NX-5000 Connectors:

24-pin ATX2.01 connector or 20-pin ATX connector	8-pin EPS12V connector or 4-Pin P4 connector
6 x 4-pin Easy connector	2 x PCI-Express (SLI)
3 x SATA connector	2 x Floppy connector

Nexus NX-5000 Specifications:

• Over-current protection: The silent power supply shall be protected from an output over-current event. The supply may shutdown from such an event and require power-on restart.
• +3.3V : 80 maximum
• +5.0V : 48 maximum
• +12V1DC : 20 maximum
• +12V2DC : 20 maximum
• Short current protection: A short circuit at any output shall cause no damage to the power supply nor blow the primary fuse. The power supply may shut down in the event of a short circuit and require power-on restart. A short circuit consists of application of a test resistance of less then 0.05 ohms at each output with maximum load on all outputs.
• Output risetime: The cold-start enable output voltage risetime of all outputs shall be measured with maximum load on all outputs. Risetime (10-95%):
  • +3.3V 20mS (max.)
  • +5V 20mS (max.)
  • +12V1DC 20mS (max.)
  • +12V2DC 20mS (max.)
  • +5Vsv 20mS (max.)
• Output overshoot: No output voltage shall overshoot or generate spikes at turn-on or turn-off, during momentary power loss, output short, or realistic input voltage or output load changes. Overshoot is defined as any output that exceeds the voltage tolerance plus or minus an additional 5%.
• Efficiency: Overall efficiency must be 70% min. measured at normal AC mains voltage and frequency with maximum loads on all outputs.
• Power good signal: 115/230V (full load): 100-500mS
• Temperature range:
  • Operating 0°C~50°C
  • Storage -20°C~+65°C
• Relative Humidity: 90%
• Safety requirements: CE, TUV EN60950, NEMKO + CB REPORT, UL 60950, CSA
• Dielectric strength: Primary to frame ground: 1800 Vac for 1 sec. Primary to secondary: 1800 Vac for 1 sec.
• Insulation resistance: Primary to secondary: 20 Meg. ohms min. Primary to frame ground: 20 Meg. ohms min.