In Stock
	Price: $27.95

Quiet CPU Fans - Zalman CNPS7000B-ALCU P4 & AMD Quiet CPU Cooler

Zalman revolutionized the quiet CPU cooling market with the 7000 series coolers. The 7000B-ALCU has slightly improved upon the 7000A heatsink not only in performance, but in an 7g weight reduction. The 7000B comes with the easy-to-use Fan Mate 2, and includes a high strength fiberglass reinforced plastic Backplate for use with AMD Sempron/AMD64 motherboards.

The 7000 series coolers are indeed without a doubt an awesome and innovative design. This CNPS7000B-ALCU is a superior cooler, cooling the most number of CPUs at a mere 20dB. The CNPS7000B-ALCU works with Pentium 4 (Socket 478) CPUs up to the 89 watt Intel Prescott 3.2 Ghz, with AMD Opteron and Athlon 64 CPUs (Socket 754, 939, and 940), and with AMD Athlon/Duron (Socket 462/Socket A). For Socket 775 up to the 89 watt Intel Prescott 3.2 Ghz, please add the ZM-CS1 Socket 775 Installation Clip to the CNPS7000-ALCU.

An Alteration of Zalman's Innovative Flower Cooler

Zalman has taken the basic concept of their flower cooler and improved upon it. Zalman's 7000 series coolers all have far superior heat dissipation because of their numerous fins. They are similar in design to the flower coolers as it also has much of the look of a rolodex. But this "rolodex" is circular rather than in the shape of a "flower", with a silent fan located in the middle of it. The incorporation of a silent fan directly in the middle of 360 degrees of thin, rolodex-like fins allows for maximum heat dissipation.

Please note: Please use extreme care when moving a computer with the CNPS7000B-ALCU attached. The maximum weight for a cooler is specified as 300g for AMD Socket 462. Special care should be taken when moving a computer equipped with a cooler which exceeds the relevant weight limit. Endpcnoise.com is not responsible for any damage that occurs when moving a computer.
 

CNPS7000B-ALCU CPU Compatibility
CPU/Socket	Silent Mode (1,350~1,800 rpm)	Low-noise Mode (1,800~2,600 rpm)
INTEL Celeron Socket 478	All Speeds	All Speeds
Pentium 4 Socket 478 Willamette	All Speeds	All Speeds
Pentium 4 Socket 478 Northwood	Up to 3.2 GHz	All Speeds
Pentium 4 Socket 478 Prescott	Up to 89watt 3.2 Ghz	All Speeds
AMD Duron Socket 462	All Speeds	All Speeds
AMD Athlon	All Speeds	All Speeds
AMD Athlon 64 Socket 754	All Speeds	All Speeds
AMD Athlon 64 FX Socket 939	All Speeds	All Speeds
AMD Athlon 64 FX Scoket 940	All Speeds	All Speeds
AMD Opteron	All Speeds	All Speeds

Specifications

CNPS7000B-AlCu

• Dimensions : 109 (L) x 109 (W) x 62 (H) mm
• Weight : 438g
• Base Material : Aluminum/Copper
• Dissipation Area : 3,154 cm2
• Bearing Type : 2-Ball
• Speed : 1,350 ~ 2,600 rpm
• Thermal Resistance : 0.27 ~ 0.20 C/W
• Noise Level : 18.0 ~ 27.5 dB

FAN Speed Controller (FAN MATE 2)

• Dimensions : 70 (L) x 26 (W) x 26 (H) mm
• Weight : 20g
• Output Voltage : 5V ~ 11V 2%
• Allowable Power : 6W or lower
• Connector : 3-Pin

Directions for Use

1. Does not generate noise or vibration in Silent Mode.
2. Pure Copper base material ensures excellent heat dissipation.
3. Intel Pentium 4 (Socket 478), AMD Duron/Athlon/Athlon XP (Socket 462), and Sempron/AMD64.
4. (Socket 754/939/940) compatible design for broad compatibility.
5. 92mm fan inside the FHS maximizes airflow and makes installation easier.
6. Adjustable fan speed controller (FAN MATE 2) enables control of noise and fan performance.

Components

• Heatsink Assembly (CNPS7000B-Cu)
• Four Bolts
• Thermal Grease
• Fan Speed Controller (FAN MATE 2)
• Double-sided Tape (for installing FAN MATE 2)
• Cable for FAN MATE 2
• User's Manual - in English and Korean
• One Set of Washers

Components for Intel Pentium 4 (Socket 478)

• Two Clip Supports for Socket 478

Components for AMD Duron/Athlon/Athlon XP (Socket 462)

• One A-Type (Blue) Clip Support for Socket 462
• One B-Type (White) Clip Support for Socket 462
• Four Bolts - For fastening the Clip Supports

Components for AMD Sempron/AMD64 (Socket 754/939/940)

• Two Nipples
• One Backplate
• Big washers (from component #12)

Notes:

• Fan should be set to Normal Mode if OVERCLOCKING.
• Zalman Tech Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING.